Focusing on the compact Y8 and Y12 line array loudspeakers, these are designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 80° and 120° horizontal directivity respectively controlled down to 500 Hz. The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution. They can be used in columns of purely Y8 loudspeakers or combined with Y12 and/or Y-SUB cabinets. The loudspeaker cabinets are constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear. Three point rigging hardware is integrated into the loudspeaker enclosure.

Frequency response (-5 dB standard): 54 Hz - 19 kHz

Frequency response (-5 dB CUT mode): 100 Hz - 19 kHz

Max. sound pressure:

with D6/10D 134 dB
with D20/30D 137 dB
with D80 139 dB


Cabinets per amplifier channel: 2

Nominal impedance: 8 Ω

Power handling capacity (RMS/peak 10 ms): 400/1600 W

Nominal dispersion angle (horizontal): 80°/120°

Splay angle settings: 0° - 14° (1° increment)

2 x 8" driver with neodymium magnet
1.4" exit compression driver
passive crossover network

Connections: 2 x NLT4 F/M

Point source speakers in the form of Y7P and Y10P Loudspeakers

are also available! Contact us to find out more.


*Price is per box per day subject to bulk order discount